User Manual

Instruction manual
23
1. To position the monitors in the way that works best for your setup, do any of the
following:
• To adjust the angle of the monitor arms (1), use the 5 mm hex key (11) to
loosen the two screws at each of the monitor arm joints. Position the monitors
at the angles that you want them in, and use the 5 mm hex key to tighten the
screws and lock the monitors into position. (gure 30)
gure 30
5 mm hex key
• To adjust the tilt angle of the monitors, use the 5 mm hex key (11) to loosen
the screw in the sides of the VESA monitor mounts (2). Position the monitors
at the angles that you want them in, and use the 5 mm hex key to tighten the
screws and lock the monitors into position. (gure 31)
gure 31
5 mm hex key