User Manual

24
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6. While holding the Grommet Plate, use the 6 mm Hex Key
to tighten the Grommet Screw, securing the Base Clamp
Assembly to the Mounting Surface.
Tightening the Grommet Screw
7. Align the Mounting Hole on the bottom of the Lower Arm
with the Mounting Peg on the top of the Base Clamp
Assembly.
8. Slide the Mounting Hole on the Lower Arm over-top of the
Mounting Peg on the Base Clamp Assembly.