User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Desk Mount Monitor Arm with 2x USB 3.0 ports, Slim Full Motion Adjustable Single Monitor VESA Mount up to 17.6lbs (8kg) Display, Ergonomic Articulating Arm, Desk Clamp/Grommet One-touch Adjustment - mounting kit - Slim Full-motion - for LCD d
29
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Note When attached, the Arrow on the VESA Mount
should be pointing toward the top of the Monitor.
Aligning the VESA Mount with Monitor
5. Select the appropriate hardware for mounting the VESA
Mount to the back of the Monitor either M4 x 12 mm, M5 x
12 mm, or your own sourced screws.
6. Insert the appropriate Screws through the Screw Holes on
the VESA Mount and into the VESA Mounting Holes on the
back of the Monitor.
7. Using a Phillips Head Screwdriver (or appropriate
screwdriver) tighten the screws.
Notes: Do not over-tighten the Screws. If you encounter re-
sistance while you’re tightening the Screws, stop tightening.
Failure to do so could result in damage to the Monitor.
8. Pull the VESA Clip on the VESA Holder back towards the
Spring Arm.