Technical Specs

Instruction Manual

Assemble the universal tablet mount

1. To open the clamp, turn the knob on the clamp (1) to the left.

2. Open the clamp to the thickness of the table or desk that you will be attaching the

tablet mount to.

3. Slide the clamp (1) over the edge of the table or desk and turn the knob on the

clamp to the right to tighten the clamp. Keep turning the knob until the clamp is

tightly attached to the table or desk.

4. Slide the end of the gooseneck arm (2) over the bolt on the clamp (1) and turn the

arm to the right to tighten it.

5. With the tablet screen facing upwards, slide one of the long sides of the tablet into

one of the retractable brackets on the tablet holder (3).

6. Pull out the other retractable bracket to open it up and place the bracket claw over

the other side of the tablet. Gently release the bracket.

Caution! Make sure that the tablet is securely xed into the tablet holder (3) before you

proceed to the next step and attach the tablet holder to the gooseneck arm (2).