Technical Specs

Instruction manual
7
Attach the laptop tray to the swivel arm
1. Insert the four M5x12 screws (8) through the laptop tray (3) and into the four holes
in the VESA mount on the swivel arm (1).
2. Thread the four M5 nuts (13) onto the M5x12 screws. (gure 2)
3. Use a wrench to tighten the M5 nuts.
4. Remove the backing from the four rubber pads (17) and ax them to the laptop
tray where appropriate to prevent the laptop from slipping. (gure 3)
gure 2
gure 3
M5x12 screws
Laptop tray
Swivel arm
VESA mount
Rubber pad
Laptop tray