Manualshelf

Technical Specs

ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Laptop Monitor Stand Computer Monitor Stand - Full Motion Articulating - VESA Mount Monitor Desk Mount - mounting kit - adjustable arm - for LCD display / notebook - black
11121314151617181920
Instruction manual
15
Route the cables
Warning! Make sure that you leave enough slack at the arm joints so that the arms can
be fully extended.
Make sure that the cables that you’re routing are unplugged before you complete the
following steps.
1. Pull out the cable rungs on the spring arm (4) and thread the display cable through
the rungs.
2. Thread the display cable through the cavity in the underside of the extension arm
(2).
3. Hold the display cable against the pole and clamp (5) while you slide the cable-
management clip (pole) (10) over the cable and onto the pole.
4. Snap the cable-management clip (laptop arm) (16) onto the swivel arm (1).
5. Run the laptop power cable along the swivel arm and through the hook in the
cable-management clip (laptop arm).
6. To adjust the placement of cable-management clip (laptop arm) on the swivel arm,
slide the cable-management clip left or right. (gure 15)
gure 15
Cable-management clip
(swivel arm)
Cable-management
clip (pole)
Pole and clamp
Extension arm
Spring arm