User Manual

Instruction manual
8
7. Run the monitor cable through the cable-management hook on the bottom of the
mounting plate. (gure 5)
gure 5
Cable-management hook
Adjust the angle of the monitor
To position the monitor, do either of the following:
Use the 5 mm hex key to loosen the screw in the monitor mount. Move the monitor
and then tighten the screw again. (gure 6)
Use the 4 mm hex key to adjust the swivel joints in the display arm. (gure 6)
gure 6
5 mm hex key
4 mm hex key