User Manual
Table Of Contents
- Compliance Statements
- Warning Statements
- Safety Statements
- Product Diagram
- Product Dimensions/Rotation
- Product Information
- Specifications
- Package Contents
- Requirements
- Installation
- Mounting the Wall Mount
- Attaching the Swivel Arm
- Removing the Swivel Arm
- Attaching a Monitor
- Attaching the Monitor Mount
- Removing the Monitor Mount
- Adjusting the Monitor Tilt
12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Requirements
• Phillips Head Screwdriver x 1
• Writing Utensil x 1
• Level x 1
Installation
Mounting the Wall Mount
Notes: Product mounting should be completed by a certi-
ed professional as per the local safety and building code
guidelines.
Wall structures vary, and it’s important to make sure that the
type of structure and mounting hardware that you’re using
will properly support the mounted equipment. Failure to do
so may result in personal injury and/or equipment damage.
1. Before installing the Wall Mount onto the mounting surface,
contact a professional contractor.
2. After consulting a professional, the Wall Mount can be
mounted using the Mounting Hardware included.
Note: The provided Mounting Hardware may not be suit-
able for use with all wall structures.
3. (Optional) While mounting, use Wall Screw Anchors if
required.
4. Remove the Decorative Caps on the Wall-Mount Bracket
by sliding them o of the ends, before mounting the Wall
Mount.