Monitor Wall Mount | Dual Swivel | Long | Premium Actual product may vary from photos User Manual SKU#: ARMWALLDSLP For the latest information and specifications visit www.startech.
Compliance Statements Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.
Warning Statements • Make sure that you assemble this product according to the instructions. • Do not exceed the weight capacity of this product. Overloading this product might result in injury or property damage. This product can support the following weight: 30.8 lb. (14 kg). • This product is intended for indoor use only and should not be used outdoors. • The mounting hardware included with this product might not be adequate for some wall structures.
Warnhinweise • Beachten Sie bei der Montage dieses Produkts die Montageanweisungen. • Überschreiten Sie nicht die Tragkraft dieses Produkts. Ein Überladen dieses Produkts kann zu Verletzungen oder zur Beschädigung des Produkts führen. Dieses Produkt ist für folgendes Gewicht geeignet: 14 kg. • Dieses Produkt ist nur zum Gebrauch in Innenräumen vorgesehen und sollte nicht im Freien verwendet werden. • Das mitgelieferte Montagematerial ist möglicherweise nicht für jede Wand geeignet.
• O hardware de montagem incluído com este produto pode não ser adequado para algumas estruturas de parede. Se não tiver o conhecimento necessário para fixar este produto à estrutura de parede que está a usar, contacte um profissional de construção para fazer a instalação em parede ou para fornecer instruções de montagem específicas para a sua estrutura de parede. Advertencias de uso • Asegúrese de ensamblar este producto según las instrucciones.
• 本製品は、室内での使用を想定しています。戸外では使用しないで下さい。 • 本製品に同梱されている取付け金具は、 ご使用になる壁の構造に対して十分ではない場合があ ります。本製品を壁面に取り付ける時、十分な専門知識が不足していると判断された場合、専門業 者に連絡を取って、本製品の取り付けを行ってもらうか、お客様の壁の構造に適した取り付け方 法を教えてもらってから取り付けを行って下さい。 Safety Statements Safety Measures • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
Table of Contents Compliance Statements.........................................................................1 Warning Statements...............................................................................2 Safety Statements...................................................................................5 Product Diagram.....................................................................................7 Product Dimensions/Rotation..............................................................
Product Diagram 5 4 3 1 2 1 Decorative Cap 4 Swivel Arm 2 Wall-Mount Bracket 5 Monitor Mount 3 Swivel Arm To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Dimensions/Rotation To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Specifications Type of Measurement Measurement VESA Mounting Hole Pattern 75x75 100x100 Tilt +900 to -150 Screen Size Maximum 30 in. (762 mm) Rotate 3600 To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Swivel +1800 to -1800 Weight/Load Capacity 30.8 lb. (14 kg) kg Package Contents Wall-Mount Bracket Swivel Arms Qty: One Qty: Two To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Monitor Mount Hex Key Qty: One Qty: One Hand Screw Mounting Screws Qty: Four Qty: Two Wall Plugs Qty: Two To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Requirements • • • Phillips Head Screwdriver x 1 Writing Utensil x 1 Level x 1 Installation Mounting the Wall Mount Notes: Product mounting should be completed by a certified professional as per the local safety and building code guidelines. Wall structures vary, and it’s important to make sure that the type of structure and mounting hardware that you’re using will properly support the mounted equipment. Failure to do so may result in personal injury and/or equipment damage. 1.
5. When the Wall-Mount Bracket has been mounted, slide the Decorative Caps over the top and bottom of the WallMount Bracket. The Decorative Caps hide the screws used to secure the Wall-Mount Bracket to the mounting surface. Installing the Decorative Caps To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Attaching the Swivel Arms 1. Align the Mounting Hole on the Swivel Arm with the Mounting Peg on the Wall-Mount Bracket. 2. Slide the Mounting Hole on the Swivel Arm over the Mounting Peg until it clicks in place. Attaching the Swivel Arm to the Mounting Peg 3. Using the Hex Key (included), tighten the Hex Screw on the side of the Swivel Arm, to increase the swivel effort or fix the arm in place. 4.
Removing the Swivel Arm 1. Slide the Thumb Clip towards the Swivel Arm, disengaging the locking mechanism. Thumb Clip 2. While holding the Thumb Clip and the weight of the Swivel Arm, lift the Swivel Arm up sliding the Mounting Peg out of the Mounting Hole. 3. Repeat steps 1 - 2 to remove the second Swivel Arm. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Attaching a Monitor 1. Align the Mounting Holes (x 4) on the Monitor Mount with the mounting holes on the back of the Monitor. 2. Insert the Hand Screws through the Monitor Mount and into the back of the Monitor. 3. Using your fingers, tighten the Hand Screws. Warning! Do not over-tighten the screws. If you encounter resistance while you’re tightening the screws, stop tightening. Failure to do so could result in damage to the monitor.
1. While supporting the weight of the Monitor, carefully align the Mounting Hole on the Monitor Mount with the Mounting Peg on the top Spring Arm. 2. Slide the Mounting Hole on the Monitor Mount over the Mounting Peg until it clicks into place. Attaching the Monitor Mount 3. Using the Hex Keys, adjust the swivel tension of the Monitor Mount by loosening or tightening the Hex Screws located on the Monitor Mount next to the Mounting Hole. Removing the Monitor Mount 1.
Thumb Clip 2. While holding the Thumb Clip and the weight of the Monitor Mount, lift the Monitor Mount up, sliding the Mounting Peg out of the Mounting Hole. Adjusting the Monitor Tilt • While supporting the weight of the Monitor, use the Hex Key (included) to loosen or tighten the Hex Screw on the side of the Monitor Mount, until the tension can hold the weight of the Monitor but it is still adjustable. Note: The screw cap located on the opposite side of the Hex Screw is not used for tilt adjustments.
Warranty Information This product is backed by a ten-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
