User Manual

11
To view manuals, videos, drivers, downloads, and more visit www.startech.com/support
Notes: Before installing a Module into the Modular Table Box, connect
each of the conference room devices to the bottom of the Module (see Con-
necting Devices to the Bottom of the Module or Connecting Devices to
the Top of the Module sections in the Module’s User Manual).
Connect the Universal Power Adapter to the bottom of the Module (see
Powering the Module section in the Modules User Manual).
2. When connecting conference room devices and power to the Module,
feed the cables through the Modular Table Box from the bottom up and
connect the required cables to the corresponding ports on the Module.
3. Insert the Module into the Modular Table Box.
Insert Module into Modular Table Box