User Manual

To view manuals, videos, drivers, downloads, and more visit www.startech.com/support

3. Using a Phillips Head Screwdriver, tighten the Lacing Bar Screws. Be

careful not to overtighten.

4. Using Cable Ties (sold separately), attach the cables connected to the

Module(s) to the Lacing Bar.

Note: The Lacing Bar is used for cable management and can help reduce

cable strain, bend radius, unintentional cable disconnects and improve

organization.

Installing the Modular Table Box into a Surface

1. Place the Modular Table Box (sold separately or included in a bundle) into

the hole in the table’s surface.

2. Under the table’s surface, slide the Wing Fasteners (1 per side) into a

Mounting Slot on the Mounting Bracket. The Mounting Slot you use will

be determined by the height of the table’s surface.

Installing the Wing Fasteners