User Manual
Table Of Contents
- Compliance Statements
- Safety Statements
- Warning Statements
- Product Diagram
- Top View
- Side View
- Product Information
- Package Contents
- Requirements
- Powering the Multiport Adapter
- USB Power Delivery 3.0
- USB Power Delivery 2.0
- Connecting the USB-C Power Adapter
- Disconnecting the USB-C Power Adapter
- Connecting the Multiport Adapter
- USB-A Ports
- HDMI Port
- RJ45 Port
- USB-A Port
- Inserting an SD Card
- Removing an SD Card
- LED Indicators
- RJ45 Port
- Additional Information
- Installing the Driver
- Configuring a Display
- Display Preference
- Troubleshooting
- Reactivating an SD Card Autoplay/Autorun Function
10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
LED Indicators
RJ45 Port
Green LED
• Solid LED
• Indicates that link speed is either 1000Mbps (1 GbE), 100Mbps, or 10Mbps
• LED O
• Indicates no connectivity
Amber LED
• Flashing LED
• Indicates that a link is established
• LED O
• Indicates no link is established
Additional Information
Installing the Driver
If the required driver does not automatically install after connecting the
Multiport Adapter to the Host Computer, complete the driver installation
manually:
1. Connect the Multiport Adapter to the Host Computer (see Connecting the
Multiport Adapter), the Found New Hardware pop-up will appear.
2. On the Found New Hardware pop-up, click the Cancel button.
3. Using a web browser, navigate to www.startech.com/DKT30CSDHPD3.
4. On the Product screen, click the Support tab located in the middle of the
screen.
5. In the Drivers and Downloads section, click on the driver link that
corresponds with the operating system running on the Host Computer.
6. Once the download is complete, extract the contents of the .Zip le.