DVI to HDMI Video Converter with Audio DVI2HDMIA *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction Packaging Contents • 1 x DVI to HDMI converter • 1 x Power Adapter • 1 x Instruction Manual System Requirements • DVI enabled video source (i.e. computer, DVR/PVR, etc.) • HDMI enabled display device (i.e. monitor, projector, HDTV, etc.
Side View 1 Side View 2 Installation Hardware Installation 1. Ensure all devices are powered off, before starting. 2. Connect the included power adapter to the video adapter. The Power LED next to the connector should light up solid. 3. Connect a standard male/male DVI cable from the video source (i.e. computer, DVR/ PVR, etc.) to the DVI input on the video converter. 4. Connect a standard male/male HDMI cable from the video converter to the display device (i.e. monitor, projector, HDTV, etc.). 5.
Troubleshooting If you are experiencing a shaky or jittery image on screen please make sure that DVI2HDMIA is set to output at 60Hz. The instructions below detail how to setup this unit to operate at 60Hz for Microsoft Windows®, and Mac OSX®. Microsoft Windows® 1. Right Click your desktop and select “Screen Resolution”. 2. The Screen Resolution window will open, select “Advanced Settings”. 3. The Advanced Video Settings window will open, click the “List All Modes” button.
4. The List All Modes window will appear, change the selection from the current (Interlaced) mode, to: 1920x1080, True Color (32bit), 60 Hertz and click the “OK” button. Mac OSX® 1. Open Display Settings from the system preferences menu. 2. Place a bullet in “Scaled” and select “1080p” from the drop down menu.
Specifications Input: DVI (digital) revision 1.0 Video Signal Output: HDMI 1.2 1 x 29-pin DVI female 2 x RCA audio female External Connectors 1 x HDMI type A female 1 x DC power LEDs 1 x Power Maximum Video Resolution 1080p / 1920x1080 (50 / 60Hz) Bandwidth 225 MHz / 2.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
