Instruction Manual
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 01/20/2012
For the most up-to-date information, please visit: www.startech.com
ET90110SC2 / ET90110ST2
10/100 Mbps Ethernet to Multi Mode SC/ST Fiber Media Converter - 2 km
Packaging Contents
• 1xFiberMediaConverter
• 1xUniversalPowerAdapter
• 3xPowerAdapterPlug(NA/UK/EU)
• 1xInstructionManual
System Requirements
• 10BASE-Tor100Base-TXcompatibleEthernetnetworkequipment
• RJ45terminatedUTPCat5orbetterEthernetcable
• 100BASE-FXcompatibleberopticnetworkequipment
• SCorSTterminatedmultimodeberopticcable
• AvailableACelectricaloutlet
Installation
1. MakesuretheDIPswitchesaresetappropriatelyforyournetwork
conguration(see“DIPSwitchSettings“sectionfordetails).
2. Connecttheberopticnetworkcablefromacomputer/switch/
mediaconvertertotheSC/STconnectoronthemediaconverter.
NOTE: Whenconnectingthebercable,makesuretoconnecttheTx
(transmit)terminalononeend,withtheRx(receive)terminalonthe
otherend.
3. ConnectaUTPEthernetcable,fromacomputer/switchtothe
RJ45jackonthemediaconverter.
4. Connectthepoweradaptertothemediaconverter.
5. Thefollowingexampleillustratestheconnectionschemewhen
connectingfroma10BASE-Tor100BASE-TXEthernetportofa
hub/switchtoa100BASE-FXportofanotherhub/switch,through
thebermediaconverter:
6. Thefollowingexampleillustratestheconnectionschemewhen
connectingfroma100BASE-TXEthernetportonahub/switchtoa
100BASE-TXEthernetNetworkInterfaceCard(NIC)inacomputer
throughthebermediaconverter:
ET90110SC2
ET90110ST2
*actual product may vary from photos
RJ45 Ethernet
connector
SC Duplex ber
connector
DIP Switches LED indicators Card Release
Thumbscrew
DIP Switches LED indicators Card Release
Thumbscrew
RJ45 Ethernet
connector
SC Duplex ber
connector
DC Power connector
Ground Point (optional)
Rear View (ET90110SC2/ET90110ST2)