User Manual

Instruction manual
1
Introduction
The ET91000SM10 converts a traditional copper Gigabit Ethernet connection (RJ45),
into a Gigabit ber connection. The media converter can then extend your network
up to 10km (6.2mi.) using single-mode LC ber-optic cable. If needed, the included
SFP module (LC ber connector) can be removed from the media converter and be
replaced with a transceiver module with dierent specications.
Packaging contents
• 1x Gigabit Ethernet ber media converter
• 1x universal power adapter (NA/EU/UK/AU)
• 1x grounding screw
• 1x instruction manual
System requirements
• Gigabit (1000Base-T) network equipment (For example, a copper network switch)
• Gigabit (1000Base-LX) ber-optic network equipment (For example, a ber network
switch)
• Terminated RJ45 UTP Cat5e or better Ethernet cable
• Terminated ber-optic cable (Single-mode, LC duplex connectors)
• AC electrical outlet