User Manual

Instruction Manual
4
LED indicators
Panel RJ45
LED Status Indication
PWR (Green)
Solid The media converter is powered on
Blinking
The media converter is upgrading (rapid
blinking)
O The media converter is not powered on
RPF (Green)
Solid Remote power failure
O Remote power is normal
LFP (Green)
Solid Link fault pass-through is turned on
O Link fault pass-through is turned o
LNK (Green)
Solid
A ber link between the media converter and
ber network equipment is established
O A ber link has not been established
LINK - RJ45 (Green)
Solid
A UTP copper link between the media converter
and RJ45 network equipment is established
O A UTP copper link has not been established
FULL - RJ45
(Green)
Solid UTP copper link is set to full duplex
O
UTP copper link is not set to full duplex (half
duplex)