Flat-Screen TV Ceiling Mount - For 32 in. to 75 in. LCD, LED, or Plasma TVs FLATPNLCEIL *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com IT: Guida per l’uso - it.startech.com JP: 取扱説明書 - jp.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/FLATPNLCEIL.
Warning statements Mensagens de aviso Make sure to assemble this product according to the instructions. Failure to do so might result in personal injury or property damage. Certifique-se de que monta este produto de acordo com as instruções. O incumprimento pode resultar em ferimentos pessoais ou danos de propriedade. Make sure that the weight of the monitor doesn’t exceed the weight capacity of this product.
Table of Contents Warnings....................................................................................................................................................... i Introduction.............................................................................................1 Product diagram......................................................................................................................................... 1 Product dimensions...................................................
Introduction The FLATPNLCEIL is a full-motion ceiling mount that’s designed to give you an easy way to suspend your flat-panel television from a ceiling or other overhead surface. The ceiling mount features easy-to-use height and tilt adjustments, which makes it easy to position your display in a way that works best for you, on a flat or sloped ceiling surface.
Product dimensions Instruction manual 2
Technical specifications Type of measurement Measurement VESA mounting hole pattern 200x200 300x300 400x200 400x400 600x400 Weight capacity Up to 110 lb. (50 kg) Tilt +00 to -250 Extension pole swivel +1800 to -1800 Extension 1060 to 1560 mm (42 to 61 in.
Type of measurement Measurement Level adjustment +30 to -30 Screen size 813 to 1905 mm (32 to 75 in.
Package contents 1 2 3 Ceiling mount and pole Extension pole Qty: One Qty: One 4 Vertical brackets Qty: Two 6 5 Horizontal bracket Bolts Nuts Qty: One Qty: Two Qty: Two 7 8 9 M13 wrench M5 Allen key Mounting template Qty: One Qty: One Qty: One 10 12 11 M5x14 mm screws M6x14 mm screws M6x30 mm screws Qty: Four Qty: Four Qty: Four Instruction manual 5
13 15 14 M8x30 mm screws M8x50 mm screws Washers Qty: Four Qty: Four Qty: Four 16 17 18 Short spacers Long spacers Qty: Eight Qty: Eight 19 6.3x55 mm screws Qty: Four 21 20 Concrete anchors Flat washers Instruction manual Qty: Four Qty: Four Qty: One Requirements • Flat-panel TV that is compatible with a VESA mount • Phillips screwdriver Requirements are subject to change. For the latest requirements, please visit www.StarTech.com/FLATPNLCEIL.
Installation Warning! Make sure that the weight of the TV doesn’t exceed the weight capacity of this product. If you exceed the weight capacity, you might experience personal injury or damage to the product. This product can support the following weight: Up to 110 lb. (50 kg).
Attach the extension pole to the ceiling mount and pole 1. Place one end of the cable through the top hole in the ceiling mount and pole (1). 2. Run the cable through the ceiling mount and pole and the extension pole (2), and out the bottom of the extension pole.
3. Slide the extension pole into the ceiling mount and pole, until the extension pole is at the height that you want it to be. (figure 3) 4. Line up the holes on the extension pole with the holes on the ceiling mount and pole. 5. Insert the two bolts (5) through the holes in the ceiling mount and pole and the extension pole. 6. Attach the two nuts (6) to the bolts, and use the M13 wrench (7) and the M5 Allen key (8) to tighten the nuts in place.
Attach the horizontal bracket 1. Use a wrench to remove the retainer nut from the back of the horizontal bracket (4). (figure 5) 2. Loosen the two nuts at the back of the horizontal bracket. 3. Attach the horizontal bracket onto the mounting bracket at the end of the extension pole (2). 4. Reattach the retainer nut that you removed in step 1 and use a wrench to tighten the nut in place. (figure 6) 5. Tighten the two nuts that you loosened in step 2.
Select the appropriate mounting hardware To accommodate different TV designs, the FLATPNLCEIL comes with three sets of screws of different lengths and diameters, and two sizes of spacers. To select the combination of mounting hardware that you need to use to attach the vertical brackets to the TV, complete the following: • Determine whether the back of the TV is flush or inset. • Determine the depth of the mounting holes on the TV. • Determine the diameter of the mounting holes on the TV.
(continued from previous page) The following hardware combinations work with an inset mounting surface: M8x50 mm or or Attach the vertical brackets to the TV Warning! Do not over-tighten the screws. If you encounter resistance while you’re tightening the screws, stop tightening. Failure to do so could result in damage to the TV. 1. Use a screwdriver to remove the screw from the mounting hardware on each of the vertical brackets (3).
3. If you’re attaching a TV with an inset mounting surface, place the spacers over the mounting holes on the back of the TV. 4. With the mounting hardware pointed towards the bottom of the TV, position the vertical brackets so that the holes on the vertical brackets line up with the mounting holes or spacers on the back of the TV. (figure 8) 5. Position the four washers (15) over the holes on the vertical brackets. Note: There are small and large holes in the washers to accommodate different screw sizes. 6.
Attach the TV to the horizontal bracket Warning! Attaching the TV is a two-person job. Do not attempt to hang the TV by yourself. 1. Carefully lift up the TV and hook the mounting hardware on the vertical brackets (3) onto the horizontal bracket (4) attached to the extension pole (2). (figure 9) 2. Close the mounting hardware, and use a screwdriver to reinsert the screws you removed from the mounting hardware on each of the vertical brackets. (figure 10) 3. Tighten the screws in place.
Adjust the TV 1. Do any of the following: • To adjust the tilt of the TV, loosen the nuts on the side of the horizontal bracket. Adjust the TV to the position that you want it in, and then tighten the nuts on the side of the horizontal bracket. (figure 11) • To swivel the TV right or left, loosen the rear retainer bolt. Adjust the TV to the position that you want it in, and then tighten the rear retainer bolt.
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a five-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.