User Manual

Instruction manual

3. If you’re attaching a TV with an inset mounting surface, place the spacers over the

mounting holes on the back of the TV.

4. With the mounting hardware pointed towards the bottom of the TV, position the

vertical brackets so that the holes on the vertical brackets line up with the mounting

holes or spacers on the back of the TV. (gure 8)

5. Position the four washers (15) over the holes on the vertical brackets.

Note: There are small and large holes in the washers to accommodate dierent screw

sizes.

6. Insert the screws into the washers, the vertical brackets, the spacers (if required),

and into the back of the TV.

7. Use a screwdriver to tighten the screws. (gure 8)

Washer

gure 8

Vertical bracket

Screw

Washer

Spacer