Flat-Screen TV Wall Mount - For 32 in. to 75 in. LCD, LED, or Plasma TVs FLATPNLWALL *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com JP: 取扱説明書 - jp.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.
Warning statements Waarschuwingen Make sure to assemble this product according to the instructions. Failure to do so might result in personal injury or property damage. Zorg dat dit product volgens de instructies in elkaar wordt gezet. Indien dit niet goed gebeurt kan lichamelijk letsel of materiële schade ontstaan. Make sure that the weight of the monitor doesn’t exceed the weight capacity of this product.
Table of Contents Warnings....................................................................................................................................................... i Introduction.............................................................................................1 Product diagrams....................................................................................................................................... 1 Technical specifications..............................................
Introduction THE FLATPNLWALL offers a sturdy way to wall-mount any flat-panel TV ranging from 32 to 75 in. in size. The wall mount supports televisions that weigh up to 75 kg (165 lb.).
Instruction manual 2
Technical specifications Type of measurement Measurement VESA mounting hole pattern 200x200 300x300 400x200 400x400 600x400 700x400 Weight capacity Up to 165 lb. (75 kg) Tilt +150 to -150 Screen size 813 to 1905 mm (32 to 75 in.
Package contents 1 2 Wall plate Left bracket Qty: One Qty: One 4 3 Right bracket Allen key Qty: One Qty: One 5 6 M5x14 mm screws M6x14 mm screws Qty: Four Qty: Four 7 8 M6x30 mm screws M8x30 mm screws Qty: Four Qty: Four Instruction manual 4
9 10 M8x50 mm screws Washers Qty: Four Qty: Four 12 11 Short spacers Long spacers Qty: Eight Qty: Eight 13 14 6.
Requirements • A flat-panel TV that is compatible with a VESA mount • A Phillips screwdriver Requirements are subject to change. For the latest requirements, please visit www.StarTech.com/FLTPNLWALL. Installation Warning! Make sure that the weight of the TV doesn’t exceed the weight capacity of this product. If you exceed the weight capacity, you might experience personal injury or damage to the product. This product can support the following weight: Up to 75 kg (165 lb.).
Select the appropriate mounting hardware To accommodate different TV designs, the FLATPNLWALL comes with three sets of screws of different lengths and diameters, and two sizes of spacers. To select the combination of mounting hardware that you need to use to attach the brackets to the TV, complete the following: • Determine whether the back of the TV is flush or inset. • Determine the depth of the mounting holes on the TV. • Determine the diameter of the mounting holes on the TV.
(continued from previous page) The following hardware combinations work with an inset mounting surface: M8x50 mm or or Attach the brackets to the TV When you attach the brackets to the TV, make sure that the knobs on the brackets face outwards.
Warning! Do not over-tighten the screws. If you encounter resistance while you’re tightening the screws, stop tightening. Failure to do so could result in damage to the TV. 1. If you’re attaching a TV with an inset mounting surface, place the spacers over the mounting holes on the back of the TV. 2. With the knobs facing outwards, position the left (2) and right (3) brackets so that the holes on the brackets line up with the mounting holes or spacers on the back of the TV. 3.
Attach the TV to the wall plate Warning! Attaching the TV is a two-person job. Do not attempt to hang the TV by yourself. Carefully lift up the TV and hook the mounting hardware on the left (2) and right (3) brackets onto the wall plate (1). (figure 3) 1. Use the Allen key (4) and tighten the screws in the bottom of the mounting hardware in both of the brackets.
Adjust the tilt of the TV 1. To adjust the tilt of the TV, loosen the tilt-adjusting knobs located on the side of each of the brackets. (figure 5) 2. Adjust the TV to the angle that you want it to be at, and then tighten the tiltadjusting knobs.
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a five-year warranty.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
