User Manual

Instruction manual
15
2. Line up the vertical brackets with the mounting holes on the back of the TV.
3. Place the rectangular washers over the vertical brackets.
4. Insert the M6x30 mm screws, M8x30 mm screws, or M8x50 screws through the
washers, vertical brackets, spacers, and into the back of the monitor.
5. Use a Phillips screwdriver to tighten the screws. (gure 9)
Warning! Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to the
monitor.
gure 9
M6x30 mm screw
M8x30 mm screw
M8x50 mm screw
Washer
Spacers
Vertical bracket