User Manual

Instruction manual
15
2. Line up the vertical brackets with the mounting holes on the back of the TV.
3. Place the large washers over the vertical brackets.
4. Insert the M6x30 mm screws, M8x30 mm screws, or M8x50 screws through the
washers, vertical brackets, spacers, and into the back of the TV.
5. Use a Phillips screwdriver to tighten the screws. (gure 8)
Warning! Do not over-tighten the screws. If you encounter resistance while youre
tightening the screws, stop tightening. Failure to do so could result in damage to the
TV.
gure 8
M6x30 mm screw
M8x30 mm screw
M8x50 mm screw
Large washer
Spacers