TV Wall Mount - Articulating Arm - For TVs up to 80” Actual product may vary from photos User Manual SKU#: FPWARTS1 For the latest information and specifications visit www.startech.
Compliance Statements Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.
Safety Statements Safety Measures • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines. • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards. Mesures de sécurité • L’installation et/ou le montage du produit doit être réalisé par un professionnel certifié et dans le respect des normes locales et du code de construction local.
Warning Statements • Make sure to assemble this product according to the instructions. Failure to do so might result in personal injury or property damage. • Make sure that the weight of the TV doesn’t exceed the weight capacity of this product. If you exceed the weight capacity, you might experience personal injury or damage to the equipment. This product can support the following weight: Up to 110 lb. (50 kg). • Never use this product if parts are missing or damaged.
para fornecer instruções de montagem específicas para a sua estrutura de parede. Varningsmeddelanden • Se till att du monterar produkten i enlighet med instruktionerna. Om du inte gör det kan skada på person eller egendom uppstå. • Se till att skärmens vikt inte överstiger produktens viktkapacitet. Om viktkapaciteten överstigs kan skada på person eller utrustning uppstå. Denna produkt har stöd för följande vikter: 50 kg. • Använd aldrig produkten om delar saknas eller är skadade.
contacto con un profesional de la construcción para instalar el soporte de pared o para que le proporcione las instrucciones específicas de montaje para su estructura de pared. Avertissements • Assemblez ce produit conformément aux instructions. Si vous ne respectez pas ces instructions, vous risquez de vous blesser ou d’endommager l’équipement. • Vérifiez que le poids du moniteur ne dépasse pas la capacité pondérale du produit.
product aan de door u gebruikte wandstructuur te bevestigen, neem dan contact op met een bouwkundige om de steun aan de muur te installeren of specifieke montage-instructies voor uw wandstructuur te geven. Warnhinweise • Montieren Sie dieses Produkt gemäß den Anweisungen. Anderenfalls kann dies zu Verletzungen von Personen oder Schäden an Eigentum führen. • Das Gewicht des TVs darf die zulässige Traglast des Produkts nicht übersteigen.
分ではない場合があります。本製品を壁面に取り付ける時、十分な専門知 識が不足していると判断された場合、専門業者に連絡を取って、本製品の取 り付けを行ってもらうか、お客様の壁の構造に適した取り付け方法を教えて もらってから取り付けを行って下さい。 Dichiarazioni di avvertenza • Assemblare il prodotto rispettando le istruzioni. Il mancato rispetto delle istruzioni potrebbe causare danni a persone o proprietà. • Verificare che il peso del monitor non superi la capacità di supporto del prodotto. In caso di superamento della capacità di supporto potrebbero verificarsi danni a persone o apparecchiature.
Table of Contents Compliance Statements.................................................................................... i Safety Statements............................................................................................... ii Warning Statements........................................................................................... iii Product Diagram................................................................................................. 1 Front View...............................
Product Diagram Front View TV Wall Mount Assembly TV Mounting Brackets To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Side View Wall Mounting Bracket Tilt QuickRelease Lever Decorative Covers To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Dimensions To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Package Contents Wall Mounting Bracket x 1 • Decorative Covers x 2 • Mounting Plates x 2 • M6 x 15 mm Screws x 4 • Round Washers, Small x 4 • Wrench x 1 • Hex Key x 1 • M5 x 14 mm Screws x 4 • M6 x 14 mm Screws x 4 • M6 x 30 mm Screws x 4 • M8 x 30 mm Screws x 4 • M8 x 50 mm Screws x 4 • Rectangular Washers x 4 • Small Spacers x 8 • Large Spacers x 8 • Round Washers, Large x 6 • User Manual x 1 Mounting Hardware • TV Wall Mount Assembly x 1 • TV Mounting Brackets x 2 • Mounting Screws x
Requirements • • • • VESA Mount Compatible Display Phillips Head Screwdriver Spirit/Bubble Level Mounting Surface Technical Specifications Type of Measurement Measurement Weight Capacity Up to 110 lb.
Installation Fasten the Wall Mounting Bracket to a Wall Warning! The TV Wall Mount is designed to be installed on a wood stud, solid concrete, or cinder block wall. The wall structure should be capable of supporting at least four times the weight of the mounted equipment. The Mounting Hardware included with this product may not be adequate for installation on certain wall structures. Contact a construction professional to install the TV Wall Mount.
Figure 1 TV Wall Mount Assembly Wall Mounting Bracket Insert and Secure the Mounting Plates 1. Determine the final location of the TV Wall Mounting Assembly along the Wall Mounting Bracket and slide the TV Wall Mounting Assembly into that location. (Figure 2) Note: Ensure the holes in the TV Wall Mounting Assembly are aligned with the holes in the Wall Mounting Bracket. 2.
Figure 2 Wall Mounting Bracket Figure 3 Mounting Plate Hex Key Mounting Plate To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
3. While holding the Mounting Plate in place, insert two M6 x 15 mm Hex Screws through two Small Round Washers and into the holes in the top of the TV Wall Mount Assembly, Wall Mounting Bracket, and Mounting Plate. 4. Partially tighten the two M6 x 15 mm Hex Screws with the Hex Key. 5. Insert one Mounting Plate behind the bottom of the TV Wall Mount Assembly, where the TV Wall Mount Assembly makes contact with the Wall Mounting Bracket.
Figure 4 Decorative Cover Attach the TV Mounting Brackets 1. Place your TV on a padded surface, screen side down, so that you can access the back of the TV. 2. (Optional) Identify and remove the pre-installed VESA Hardware from the back of your TV. Note: Not all TVs will have placeholder VESA Hardware. Ensure you are only removing the four Screws for the VESA Mount. Do not remove any of the screws from your TV’s structural assembly. 3.
Figure 5 Rectangular Washer Mounting Brackets M-Type Screw TV Spacers 4. Place the TV Mounting Brackets, parallel to one another, on the back of the TV over the VESA Mounting Holes. The arrows on the TV Mounting Brackets should be pointing towards the bottom of the TV. (Figure 3) 5. Place the four Rectangular Washers onto the TV Mounting Brackets. Align the holes in the Rectangular Washers with the VESA Mounting Holes. Note: Each Rectangular Washer features two holes.
Figure 6 TV 7. Tighten the M-Type Screws with a Phillips Head Screwdriver, until each Screw is flush with the surface of the Vertical Bracket. Warning! Do not overtighten the M-Type Screws. If you encounter any unexpected resistance as you are fastening these Screws, immediately stop and attempt to use a different length of M-Type Screw. Attach the TV to the TV Wall Mount Assembly 1. Remove the Screws, located at the bottom of the TV Mounting Brackets, with a Phillips Head Screwdriver. 2.
Figure 7 TV Wall Mount Assembly TV Wall Mounting Bracket 3. Insert the Screws back into the bottom of the TV Mounting Brackets. Tighten using a Phillips Head Screwdriver. (Figure 8) Figure 8 Screw Phillips Head Screwdriver To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Operation Adjust the TV Caution! Ensure that your fingers are clear from all moving parts and pinch points while adjusting your TV. Adjust the Rotation Note: We recommend that two people complete the following rotation adjustment steps. 1. Partially loosen the four Nuts, located on the back of the H-Bracket, using the Wrench. 2. Rotate the TV so that it is level. Tip: Use a Spirit/Bubble Level. Tighten the four Nuts, located on the back of the H-Bracket, using the Wrench. (Figure 9) Adjust the Tilt 1.
Figure 9 H-Bracket Nuts Wrench Figure 10 Tilt Quick-Release Lever To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Cable Management 1. Connect all of the Power and Video Cables to the TV. 2. Clip the Power and Video Cables into the two Cable Management Housings, located on the bottom of the TV Wall Mount Assembly. (Figure 11) 3. (Optional) Route the other end of your Cables behind your Mounting Surface. Note: Consult a professional in order to complete this portion of the installation. Special tools, installation procedures, and even specialized cables are required for in wall cable management.
Warranty Information This product is backed by a five-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
