User Manual

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

3. While holding the Mounting Plate in place, insert two M6 x

15 mm Hex Screws through two Small Round Washers and

into the holes in the top of the TV Wall Mount Assembly,

Wall Mounting Bracket, and Mounting Plate.

4. Partially tighten the two M6 x 15 mm Hex Screws with the

Hex Key.

5. Insert one Mounting Plate behind the bottom of the

TV Wall Mount Assembly, where the TV Wall Mount

Assembly makes contact with the Wall Mounting Bracket.

Ensure the Mounting Plate is oriented so that the two

bumps are pointing downwards. Align the holes in the

Mounting Plate with those found in the TV Wall Mount

Assembly and the Wall Mounting Bracket.

6. While holding the Mounting Plate in place, insert two M6

x 15 mm Hex Screws through two Round Washers, Small

and into the holes in the bottom of the TV Wall Mount

Assembly, Wall Mounting Bracket, and Mounting Plate.

7. Tighten all four M6 x 15 mm Hex Screws with the Hex Key.

Attach the Decorative Covers

• Attach the upper and lower Decorative Covers by sliding

each Decorative Cover onto the TV Wall Mount Assembly,

until you hear or feel the Tabs of each Decorative Cover

snap into place. (Figure 4)