User Manual

Instruction manual
8
Attach the wall mount to the wall
Warning! The wall mount is designed to be installed on a wood stud, solid concrete,
or cinder block wall. The wall structure should be capable of supporting at least four
times the weight of the mounted equipment. The mounting hardware included with
this product may not be adequate for installation on certain wall structures. If you lack
the necessary expertise to attach this product, contact a construction professional
to install the wall mount or to provide specic mounting instructions for your wall
structure. Failure to do so may result in personal injury and/or equipment damage.
1. Snap the level into the indentation at the top of the wall mount. (gure 2)
2. Position the wall mount on the wall so that the arrows on the wall mount are
pointing upwards.
3. Use the level to make sure that the wall mount is level. (gure 3)
gure 2
4. Use the holes in the ends of the mounting bracket as a template to mark the
location on the wall where you want to attach the wall mount. (gure 4)
5. Follow the appropriate steps for the type of wall that you’re using and attach the
wall mount to the wall.
Level
Wall mount
gure 3