User Manual

Instruction manual
10
Attach the adapter brackets to a ush mounting surface
To accommodate dierent TV designs, the FPWFXBAT comes with ve sets of screws of
dierent lengths and diameters, washers with two hole sizes, and two sizes of spacers.
1. To select the combination of mounting hardware that you need to use to attach the
adapter brackets to the TV, complete the following:
Determine the depth of the mounting holes on the TV.
Determine the diameter of the mounting holes on the TV.
Note: If you’re using a TV with a ush mounting surface, you don’t need to use any of
the provided spacers.
2. Position the adapter brackets so that the arrows on the at side of the adapter
brackets are pointing towards the top of the TV and the nuts on the adapter
brackets are pointing towards the outside edges of the TV. (gure 5)
gure 5
top of the TV
Left adapter bracket Right adapter bracket