User Manual

Instruction manual
11
3. Line up the adapter brackets with the mounting holes on the back of the TV.
4. Place the rectangular washers over the adapter brackets.
5. Insert the M5x14 mm screws or M6x14 mm screws through the rectangular
washers, adapter brackets, and into the back of the TV.
6. Use a Phillips screwdriver to tighten the screws. (gure 6)
Warning! Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to
the TV.
gure 6
Adapter bracket
M5x14 mm screw
M6x14 mm screw
Rectangular washer