TV Wall Mount | Heavy-Duty | Tilt Actual product may vary from photos User Manual SKU#: FPWTLTB1 For the latest information and specifications visit www.startech.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
Safety Statements Safety Measures • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines. • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards. Mesures de sécurité • L’installation et/ou le montage du produit doit être réalisé par un professionnel certifié et dans le respect des normes locales et du code de construction local.
Warning Statements • Make sure to assemble this product according to the instructions. Failure to do so might result in personal injury or property damage. • Make sure that the weight of the TV doesn’t exceed the weight capacity of this product. If you exceed the weight capacity, you might experience personal injury or damage to the equipment. This product can support the following weight: Up to 75 kg (165 lb.). • Never operate this product if parts are missing or damaged.
Avertissements • Assemblez ce produit conformément aux instructions. Si vous ne respectez pas ces instructions, vous risquez de vous blesser ou d’endommager l’équipement. • Vérifiez que le poids du moniteur ne dépasse pas la capacité pondérale du produit. Si vous dépassez la capacité pondérale, vous risquez des blessures corporelles ou des dommages matériels. Ce produit peut supporter de 75 kg. • N’utilisez pas ce produit si des pièces sont endommagées ou manquantes. • Les structures des murs varient.
Waarschuwingen • Zorg dat dit product volgens de instructies in elkaar wordt gezet. Indien dit niet goed gebeurt kan lichamelijk letsel of materiële schade ontstaan. • Zorg dat het gewicht van het scherm de maximale capaciteit van dit product niet overschrijdt. Als u de gewichtscapaciteit overschrijdt, kan persoonlijk letsel of schade aan de apparatuur ontstaan. Dit product ondersteunt het volgende gewicht: 75 kg. • Gebruik dit product nooit als er onderdelen ontbreken of beschadigd zijn.
Mensagens de aviso • Certifique-se de que monta este produto de acordo com as instruções. O incumprimento pode resultar em ferimentos pessoais ou danos de propriedade. • Certifique-se de que o peso do monitor não excede a capacidade de peso deste produto. Se exceder a capacidade de peso, pode sofrer ferimentos pessoais ou danos no equipamento. Este produto pode suportar o seguinte peso: 75 kg. • Nunca opere este produto se faltarem peças ou estas estiverem danificadas.
contacto con un profesional de la construcción para instalar el soporte de pared o para que le proporcione las instrucciones específicas de montaje para su estructura de pared. 注意 • 必ず取扱説明書に従って本製品の組み立てを行って下さい。 • 最初に取扱説明書を最後まで読み、本製品の組み立て方をすべて理解し てから組み立て作業を始めて下さい。 • 本製品は、室内での使用を想定しています。戸外では使用しないで下さ い。 • 本製品は、二人がかりでの組み立てを想定しています。手助けなしに単独 で組み立てと設置を行わないで下さい。 • モニタの重量が本製品の最大積載重量を超えないようにして下さい。最 大積載重量をオーバーした場合、怪我をする恐れや器物破損の恐れがあ ります。モニタアームの耐荷重：2-8 kg. キーボードトレイの耐荷重：2.5 kg.
Table of Contents Safety Statements...................................................................................2 Warning Statements...............................................................................3 Product Diagram.....................................................................................9 Product Information...............................................................................10 Package Contents..........................................................................
Product Diagram 1 3 2 3 4 4 Number Part 1 Bubble Level (1) 2 Wall Bracket (1) 3 Vertical Brackets (2) 4 Release Straps (2) To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Package Contents Wall Bracket Vertical Brackets Qty: One Qty: Two To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Tilt Adjustment Knobs Bubble Level Qty: Two Qty: One M5x14 mm Screws M6x14 mm Screws Qty: Four Qty: Four To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
M6x30 mm Screws M8x50 mm Screws Qty: Four Qty: Four M8x30 mm screw Rectangular Washers Qty: Four Qty: Four To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Small Spacers Large Spacers Qty: Eight Qty: Eight Wall Screws Concrete Anchors Qty: Six Qty: Six To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Round Washers Qty: Six Requirements For the latest requirements, please visit www.startech.com/ FPWTLTB1. • A Display or TV, compatible with the VESA mounting hole patterns • A Phillips Head Screwdriver Installing the Tilt Adjustment Knobs 1. On the Vertical Bracket, remove the top nut located on the side of the Vertical Bracket. Once removed the nuts can be discarded. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Removing Nut To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
2. Replace the nut with one of the Tilt Adjustment Knobs. Tilt Adjustment Knob 3. Repeat steps 1 - 2 to install the second Tilt Adjustment Knob on the other Vertical Bracket. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Installing the Bubble Level • Insert the Bubble Level into the impression on the center on the top of the Wall Bracket. Installing the Bubble Level Mounting the Wall Bracket Notes: StarTech.com is not responsible for any damages related to the installation of this product. The Wall Mount can accommodate up to 100” TV with a max weight of 165lbs (75kg), when installed properly. 1. Position the Wall Bracket on the wall, in the desire position. 2.
3. The TV Wall Mount can be mounted using the Mounting Hardware included. Attaching the Vertical Brackets (Flush Mounting) To accommodate different TV designs, the TV Wall Mount comes with five sets of screws of different lengths and diameters, washers with two hole sizes, and two sizes of spacers. 1. Determine the depth and diameter of the mounting holes located on the back of the TV. 2. Once you determine the correct depth and diameter of the hardware needed.
5. Insert the either the M5x14 mm or M6x14 mm Screws (depending on the hardware requirement), through the Rectangular Washers, Vertical Brackets, and into the TV. Securing the Vertical Bracket To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
6. Use a Phillips Head Screwdriver to tighten the screws. Do not over-tighten the screws. Note: If you encounter resistance, stop tightening. Failure to do so could result in damage to the TV. Recessed Mounting 1. Determine the depth and diameter of the mounting holes located on the back of the TV. 2. Once you determine the correct depth and diameter of the hardware needed. 3. Place the Spacers (depending on your TV configuration) over the Screw Holes on the back of the TV.
6. Insert either the M8x30 mm, M8x50 or M6x30 mm Screws (depending on the hardware requirement), through the Rectangular Washers, Vertical Brackets, and into the TV. Spacer Installation 7. Use a Phillips Head Screwdriver to tighten the screws. Do not over-tighten the screws. Note: Do not over-tighten the screws. If you encounter resistance while you’re tightening the screws, stop tightening. Failure to do so could result in damage to the TV.
Spacer Combination Screw Type Spacer Combination M6 x 30 mm M8 x 30 mm M8 x 50 mm To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Mounting the TV Warnings! Make sure that the weight of the TV doesn’t exceed the weight capacity of this product. This product can support the following weight: Up to 75 kg (165 lb.). Attaching the TV is a two-person job. Do not attempt to complete this task by yourself. 1. One person holds one side of the TV, (one person per side). 2. Carefully lift up the TV and slightly tilt the top of the TV toward the mounting surface.
Adjusting the Tilt Note: The Wall Mount has a tight radius of +5 degrees upward -10 degrees downward. 1. Loosen both Tilt Adjustment Knobs on the sides of the Vertical Brackets. 2. Tilt the TV (either up or down) into the desire location. 3. Re-tighten both Tilt Adjustment Knobs to lock the TV into the desired position. TV Wall Mount Tilt Adjustment To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Removing the TV Warning! Removing the TV is a two-person job. Do not attempt to complete this task by yourself. 1. While supporting the weight of the TV, pull down on both of the Release Straps. The Lock will disengage. Release Straps 2. The bottom of the TV will release from the Wall Bracket. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
3. Tilt the bottom of the TV away from the Wall Bracket and lift the TV up to unhinge (disengage) the TV from the top of the Wall Bracket. 4. Place the TV in a secure spot. To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Warranty Information This product is backed by a five-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall it be the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
