User Manual
Table Of Contents
- Safety Statements
- Warning Statements
- Product Diagram
- Product Information
- Package Contents
- Requirements
- Installing the Tilt Adjustment Knobs
- Installing the Bubble Level
- Mounting the Wall Bracket
- Attaching the Vertical Brackets (Flush Mounting)
- Recessed Mounting
- Spacer Combination
- Mounting the TV
- Adjusting the Tilt
- Removing the TV
21
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6. Insert either the M8x30 mm, M8x50 or M6x30 mm Screws
(depending on the hardware requirement), through the
Rectangular Washers, Vertical Brackets, and into the TV.
Spacer Installation
7. Use a Phillips Head Screwdriver to tighten the screws. Do
not over-tighten the screws.
Note: Do not over-tighten the screws. If you encounter
resistance while you’re tightening the screws, stop tightening.
Failure to do so could result in damage to the TV.