User Manual

Instruction manual
14
4. Line up the adapter brackets with the mounting holes on the back of the TV.
5. Place the rectangular washers over the adapter brackets.
6. Insert the M6x30 mm screws, M8x30 mm screws, M8x50 mm screws through the
rectangular washers, adapter brackets, spacers, and into the back of the TV.
7. Use a Phillips screwdriver to tighten the screws. (gure 8)
Warning! Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to
the TV.
gure 8
M6x30 mm screw
M8x30 mm screw
M8x50 mm screw
Adapter bracket
Spacers
Rectangular washer