User Manual

Applications
Connect your video source to multiple displays in a point-to-multipoint configuration, over a Gigabit Network
using additional ST12MHDLANRX Receivers
Connect the transmitter and receiver point-to-point directly over Cat5/Cat6 cabling, for a small scale one-to-
one video extension up to 330 feet (100 meters)
Connect the transmitter and receiver point-to-point over a Gigabit Ethernet Network for long range HDMI
extension
Place the display in a convenient viewing area, while the HDMI source equipment is placed elsewhere in a
separate, secured environment
Display the same HDMI audio / video signal on over 100 displays, for large scale digital signage applications
Extend HDMI using existing infrastructure
Run multiple transmitters and receivers over the same network using a managed switch
Features
Connect up to 100 displays on a single Gigabit managed network (IGMP, managed switch required)
Stereo Audio
Optional mounting hardware included
Connect through a Gigabit LAN Network, or Point-to-Point
High Definition support for resolutions up to 1080p (1920x1080)
Local transmitter and one remote receiver unit included (additional receiver units available separately)
EDID emulation ensures maximum resolution and compatibility with your display or projector