User Manual
Quick-start guide
DE: de.startech.com
FR: fr.startech.com
ES: es.startech.com
IT: it.startech.com
NL: nl.startech.com
PT: pt.startech.com
JP: jp.startech.com
Manual Revision: 10/15/2020
For the latest information, technical specications, and support for
this product, please visit www.StarTech.com/ICUSB232PROC.
Package contents
• 1 x serial adapter cable
• 1 x quick-start guide
ICUSB232PROC
USB-C™ to RS232 Serial DB9 Adapter Cable with COM Retention
Pin 1 DCD
Pin 2 RXD
Pin 3 TXD
Pin 4 DTR
Pin 5 GND
Pin 6 DSR
Pin 7 RTS
Pin 8 CTS
Pin 9 RI
RS-232 DB9 male pinout
1
5
6
9
Requirements
• USB Type-C™ port
Requirement are subject to change. For the latest requirements,
please visit www.StarTech.com/ICUSB232PROC.
Product diagram
USB-C connector DB9M RS232 connector
Install the adapter cable
Windows
1. In a web browser, navigate to www.StarTech.com/ICUSB232PROC.
2. Click the Support tab.
3. Under Driver(s), download the [Prolic_PL2303] Windows USB
Serial Adapter.zip le.
4. Right-click the folder that you downloaded and click Extract All.
5. Right-click the Setup.exe le and click Run as Administrator.
6. Follow the on-screen instructions to complete the installation.
7. When prompted, restart your computer.
8. Connect the serial adapter cable to a USB port.
About COM retention
The USB to serial adapter features COM retention (also known as
COM port retention). With COM retention, the COM port settings
that are assigned the rst time that the adapter is connected to a
computer are retained, regardless of the USB port that the adapter
cable is connected to. When you disconnect the serial adapter cable
and plug it into a dierent USB port on the same computer, you
don’t need to recongure the serial port.