User Manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
November 22, 2018 12:04 PM
Product Diagram (LTLOCK3DCOIL)
Component Function
1 Reset Screw
• Used to set a new combination..
Note: Once the combination is changed, if you
lose the new combination you will not be able to
reset the combination.
2 Guide Line
• Used to enter a combination on the Dials.
• Align the combination with the Guide Line.
3 Dials • Used to enter the Lock’s combination.
4 Security Cable
• Used to secure a Device to a secure stationary
object.
5 Locking Hook • Used to connect the Lock to a Lock Slot.
6 Release Button • Used to release the Lock from a Lock Slot.
3-Digit Combination Laptop Lock
1
Requirements
For the latest requirements, please visit www.startech.com/LTLOCK3DCOIL.
• Default Combination = 0-0-0
Setting a New Combination
1. Align the numbers on the Dial with the Guide Line using the default combination
0-0-0.
2. Insert a Flathead Screwdriver (sold separately) into the Reset Screw and push the
Reset Screw in toward the Lock.
3. With the Reset Screw pushed in, turn the Reset Screw clockwise 90 degrees.
4. Rotate each of the Dials to the desired numbers.
5. Insert the Flathead Screwdriver into the Reset Screw and turn the Reset Screw
counter-clockwise 90 degrees moving the Reset Screw, back to its original position.
The Reset Screw will pop back out once it is in the original position.
Note: Be sure to write down the new combination and keep it in a secure location
away from the lock.
6. To set a new combination follow steps 1 - 5 using the new combination set up in
Step 4 instead of the default combination.
Locking a Device
1. Wrap the Security Cable around a secure stationary object and pull the Lock
through the loop on the Security Cable.
Security Cable
2. Press and hold the Release Button and insert the Locking Hook into the Lock Slot
on a Laptop, Docking Station or any other compatible Device.
4
5
3
6
2