User Manual
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 4, 2019
Product Diagram (LTSTND)
Angled View
Part Function
1 Top Plate • A platform for a Laptop
2 Upper Leg
• Attaches to the Top Plate
• Congurable with three height-adjustment
settings
3
Cable-Management
Slots
• Organize and route Cables
4 Lower Leg • Attaches to the Upper Leg
5
Height-Adjustment
Knob
• Secure the Upper Legs and Lower Legs
together
• Can be removed to adjust height settings
Laptop Stand - Height Adjustable
Requirements
• Clean, Flat, and Stable Surface x 1
For the latest requirements please visit: www.startech.com/LTSTND.
Installation
Assembly
1. Place the Top Plate, top side down, onto a Clean, Flat, and Stable Surface.
Note: The lip on the Top Plate can overhang o the edge of the Surface for a level
installation.
2. Place the Upper Legs onto the Top Plate. Ensure the Holes in the Upper Legs
are aligned with the Threaded Posts on the Top Plate. The slanted portion of the
Upper Legs should be aligned with the slanted portion of the Top Plate.
3. Secure the Upper Legs to the Top Plate, using two Nuts for each side. Fasten the
Nuts using the Wrench. (Figure 1)
Note: Align the outside edges of the Upper Legs with the outside edges of the Top
Plate before tightening the Nuts.
1
4
2
5
3
Figure 1
Wrench
Nut
Upper Leg
Top Plate
Threaded
Post