User Manual

ManualsBrandsStarTech ManualsComputer Display Cables & AdaptersMini DisplayPort to DVI Active Adapter

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: March 28, 2019 9:02 AM

Product Diagram (DP2DVIS/MDP2DVIS)

Port Function

1 DVI Port

• Used to connect the Converter to a DVI

Display Device.

DisplayPort Connector

(DP2DVIS)

Mini DisplayPort

Connector

(MDP2DVIS)

• Used to connect the Converter to a Video

Source Device.

Requirements

For the latest requirements, please visit www.startech.com/DP2DVIS or www.startech.

com/MDP2DVIS.com.

• DisplayPort enabled computer system/video card (compatible with both Multi-

mode DisplayPort DP++ and Single-mode DisplayPort video cards)

• DVI-D (digital) enabled display device (i.e. monitor, projector, HDTV, etc.)

Installation

1. Make sure the video display device (i.e. monitor, projector, HDTV, etc.) is turned o,

before connecting to the adapter.

2. Connect a standard male/male DVI-D cable from the converter adapter to the video

display device.

3. Turn on the video display device.

DisplayPort to DVI Single-Link Active Converter

4. Connect the DisplayPort or Mini DisplayPort connector on the converter adapter to

the video source device (i.e. computer, laptop, etc.). The computer can be on or o,

as it should be able to automatically detect and congure the adapter and display

device (refer to documentation that came with the computer).

5. Once the external display is detected and congured, the video output should be

visible on the display device. Some adjustments may be necessary from the video

source devices output settings for optimal viewing.

Specications

Video Signal • DisplayPort 1.1a

• DVI-D (DDWG 1.0)

Connectors • 1 x DisplayPort male (DP2DVIS

• 1 x Mini Display Port male (MDP2DVIS)

• 1 x 25-pin DVI-D female

Maximum Video Resolution • 1920 x 1200

HDCP Support • Yes

Operating Temperature • 0°C ~ 70°C (32°F ~ 158°F)

Storage Temperature • 0°C ~ 70°C (32°F ~ 158°F)

Dimensions (LxWxH) • 200.0mm x 44.0mm x 20.0mm

Weight • 70 g

Summary of content (2 pages)

PAGE 1
Quick-Start Guide DisplayPort to DVI Single-Link Active Converter Product Diagram (DP2DVIS/MDP2DVIS) 4. Connect the DisplayPort or Mini DisplayPort connector on the converter adapter to the video source device (i.e. computer, laptop, etc.). The computer can be on or off, as it should be able to automatically detect and configure the adapter and display device (refer to documentation that came with the computer). 5.
PAGE 2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.