Operation Manual

Instruction Manual
7
Menu Item Description
Socket Port of Serial
I/O
Port Number:
Any number between 1 and 65536,except 80
and 8080 (these have been designated as the
web pages).
Socket Type:
TCP Server - Uses TCP protocol, passively
waits for Client.
TCP Client - Uses TCP protocol, actively
connects to Server.
UDP Client - Uses UDP protocol, exchanges
packets with Server without connection.
Socket Port of Digital
I/O
Spared function for the future expansion.
Currently has no function.
Destination IP
Address/Socket Port
(TCP client and UDP)
The Server IP address under TCP client or UDP
client mode.
Serial I/O Settings
(baud rate, parity, data
bits, stop bits)
Baud Rate: 300 – 115200 bps
Parity Bits: No Parity, Even, Odd
Data Bits: 5, 6, 7, 8
Stop Bit: 1 or 2
Interface of serial I/O RS-232
Packet mode of serial
input
If packet mode is disabled, the data received
from the serial port will be transmitted
immediately with minimal delay. If packet
mode is enabled, the data will be saved in the
buer memory rst, and transmitted when
the entire packet is received or when the
buer memory is full.
Packet mode inter-
packet timeout
In packet mode, the time constant used
to determine if the packet is nished.
Acceptable range is 10 to 1000 ms.
Device ID User assigned device ID number. Acceptable
range is 0 to 65535.