Manualshelf

Operation Manual

ManualsBrandsStartech ManualsHardwareStarTech.com 1 Port PCI Express 10/100 Ethernet Network Interface Adapter Card network adapter - PCIe - 10/100 Ethernet
12345678910
Instruction Manual
4
Windows Vista®/7
Once the Windows Vista® operating system loads following hardware installation, the PEX100S
10/100 Mbps Ethernet PCI Express Card will be detected, launching automatic installation of the
Gigabit Ethernet PCI Express Card.
Once this is complete:
1. Insert the Driver CD driver bound with 10/100 Mbps Ethernet PCI Express Card into your
CD-ROM Drive.
2. Insert the Driver CD that was included with PEX100S.
3. Locate the setup.exe le on the CD. Double click on it to install the driver.
4. Follow the on-screen instructions to complete the installation.
5. Restart the computer to complete the installation.
Verifying Successful Installation (Optional)
Once the computer has been powered on following the driver installation and the connection
of the desired drive, you may wish to verify that the necessary les have been installed properly.
To do so:
Right-click on My Computer and select Manage.
In the left pane of the Computer Management window, select Device Manager.
In the right pane of the Computer Management window, click on Network Adapters; here, you
should see an Realtek RTL8139/810x Family Fast Ethernet NIC (Windows® 2000/XP/Server2003)
or Realtek RTL8101 Family PCI-E Fast Ethernet NIC (NDIS 6.0) (Windows® Vista).