Installation Instructions

2x M.2 SSD Controller Card - PCIe
StarTech ID: PEX2M2
This M.2 SSD controller card lets you install two M.2 SATA solid-state drives (SSD) into your PC through PCI
Express. You can mount virtually any M.2 drive directly to the card, giving you a convenient and discreet way to
improve your computer system performance. Plus, the card is a vital computer add-on if you need to recover
data from an existing M.2 drive, or for expanding your overall internal storage.
Leverage the speed and size of M.2 drives
This M.2 controller card lets you take full advantage of the performance and size benefits of NGFF (Next
Generation Form Factor) SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so
you can install them in tighter areas within your computer case. By freeing up space within your computer, you’ll
also have more room for additional hardware upgrades.
When you couple the card with an M.2 drive, you can give your computer’s performance a noticeable speed
boost, enabling you to replace your platter drive with a faster M.2 SATA III (6Gbps) solid-state drive. By
installing your operating system on the M.2 drive, you'll have faster access to the files you commonly use, and
you can continue to use your higher-capacity platter HDD for bulk storage.
Rest assured, with simple and cost-effective data recovery
Due to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has
failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed
and the data recovery is complete, you can continue to use the drive for storage and backup purposes.
Wide compatibility
You can also rest assured that your M.2 SATA drives are compatible with the card. It supports the most
common drive sizes, including 22110, 2280, 2260, 2242 and 2230.
www.startech.com
1 800 265 1844

Summary of content (4 pages)