Product Data Sheet / Brochure

Technical Specifications
Warranty 2 Years
Bus Type PCI Express
Card Type Standard Profile (LP bracket incl.)
Industry
Standards
Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)
Industry
Standards
PCI Express 3.0
Interface M.2 SATA (NGFF)
Interface SATA
Interface M.2 PCIe (NVMe)
Port Style Integrated on Card
Ports 3
ATAPI
Support
Yes
Bootable Yes
MTBF 50,000 Hours
Port Multiplier No
RAID No
Type and
Rate
SATA III (6 Gbps)
Connector
Type(s)
1 - PCI Express x4 Male
Internal Ports 3 - M.2 (NGFF; B-Key) Receptacle
Internal Ports 2 - SATA (7 pin; Data) Plug
OS
Compatibility
OS Independent; No additional drivers or software required
Note: When installed in a compatible operating system, the card is natively supported and
doesn’t require any additional drivers or software. However, your operating system must natively
support PCIe SSDs (NVMe - Non-Volatile Memory Express).
Note The maximum throughput of this card is limited by the bus interface. If used with PCI Express
Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express
Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.
System and
Cable
Requirements
A computer enabled with PCI Express (PCIe), and an available PCI Express x4, x8, or x16 slot
System and One or two SATA host ports on the host computer (for example, the SATA controller card, or the
www.startech.com
1 800 265 1844