User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com 21U 19" Wall Mount Network Rack, Adjustable Depth 12-20" 2 Post Open Frame Server Room Rack for AV/Data/ IT Communication/Computer Equipment/Switch with Cage Nuts & Screws 21U Adjustable Rack - rack - 21U

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 17, 2021 1:14 PM

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Product IDs

RACK-18U-20-WALL-OA

RACK-21U-20-WALL-OA

RACK-24U-20-WALL-OA

Product Diagram

Front - Angled View

Component Function

Front Horizontal

Brackets (x 2)

• Structural components of the Adjustable Depth

Server Rack

• Holes, located on the top and sides, allow for

adjustable depth from 12-20 inches

2 Vertical Rails (x 2)

• Structural components of the Adjustable Depth

Server Rack

• Features Cage Nut Holes

3 Cage Nut Holes

• Use Cage Nuts to mount equipment into the

Adjustable Depth Server Rack

4 Bolts and Washers (x 24) • Assemble the structural components

Adjustable Depth Open Frame Wall Mount Equipment Rack

Rear Horizontal Brackets

(x 2)

• Structural components of the Adjustable Depth

Server Rack

• Holes, located on the top and sides, allow for

adjustable depth from 12-20 inches

Wall Mounting Holes

(x 8)

• Wall mount the Adjustable Depth Server Rack

Assembly Screw Holes

(x 16)

• Assembly Screw Holes can be found on the Front

Horizontal Brackets and Vertical Rails

• Assemble the structural components

8 Adjustment Holes • Set the mounting depth

Product Information

For the latest manuals, product information, technical specications, and declarations of

conformance, please visit:

www.StarTech.com/RACK-18U-20-WALL-OA

www.StarTech.com/RACK-21U-20-WALL-OA

www.StarTech.com/RACK-24U-20-WALL-OA

Requirements

• Phillips Head Screwdriver

• Appropriate Mounting Hardware for the Wall Type x 4

• (Optional) Wrench

• (Optional) Cage Nut Tool

Warnings

• Read the entire manual and ensure the instructions are fully understood before

assembling and/or using this product.

• Before adding equipment to this product, ensure this product has been properly

mounted.

• Never operate this product if parts are missing or damaged

• The mounting hardware included with this product might not be adequate for some

wall structures. If lacking the necessary expertise to wall mount this product, contact

a construction professional to install the wall mount or to provide specic mounting

instructions for the wall structure.

• Ensure the weight of the equipment does not exceed the weight capacity of this

product. If the weight capacity is exceeded, personal injury or damage to the

equipment are possibilities. This product can support the following weight: up to 90

kg (198.4 lb.).

*Product may vary from image

Summary of content (2 pages)

PAGE 1
Quick-Start Guide Adjustable Depth Open Frame Wall Mount Equipment Rack Product IDs • Structural components of the Adjustable Depth Server Rack Rear Horizontal Brackets 5 (x 2) • Holes, located on the top and sides, allow for adjustable depth from 12-20 inches RACK-18U-20-WALL-OA RACK-21U-20-WALL-OA RACK-24U-20-WALL-OA Product Diagram Front - Angled View 1 Mounting Holes 6 Wall (x 8) • Wall mount the Adjustable Depth Server Rack Screw Holes 7 Assembly (x 16) • Assembly Screw Holes can be found on th
PAGE 2
• Wall structures vary. Ensure the type of wall structure and mounting hardware will properly support the mounted equipment. Failure to do so might result in personal injury and/or equipment damage. The wall structure should be capable of supporting at least four times the weight of the mounted equipment.