Owners manual

Instruction Manual
9
example, the control panel may include an Advanced Properties button, an Adjustment
tab, or a Refresh tab for changing other settings. Other video cards have a separate
utility for setting display properties.
Whenever you change the resolution, color, or refresh rate, the image size, position, or
shape may change. This behavior is normal. You can readjust the image using the
monitor on-screen controls. For more information on the monitor on-screen controls, refer
to Panel controls and OSD functions. For more information on configuring the display
settings, please refer to the manual that accompanied your video card.
Testing the console
To test that the console is working properly, perform the following steps:
1. Power up the LCD Rack drawer, and then turn on your computer.
2. Make sure the video image is centered within the screen area. Use the OSD controls
to adjust the image (see Panel controls and OSD functions) or press the Auto
button on the right hand side of the monitor.
Note: You can adjust the horizontal and vertical position, contrast, and brightness to
better suit your video card and your personal preference.
Before you begin, make sure that power to all of the devices you will be connecting to the
console have been turned off. To prevent damage to your installation due to ground
potential difference, make sure that all of the devices being installed are properly
grounded. Once all peripherals have been connected, please power them on.
Panel controls and OSD functions
The following controls are located on the console monitor:
Controls Descriptions
Soft power on/off. Adjacent LED is lit when on
Auto Auto-synchronize and scale down display to any valid factory preset timings
Up Press to scroll to the function you want to adjust.
Down Press to scroll to the function you want to adjust.
Menu To access the main menu. This button also acts as the Enter button.