Owners manual

Instruction Manual
15
Function key <F4> - More functions are available by hitting <F4>. A new screen pops
up displaying more functions as described below. Most of them are marked with a
triangle (

) indicating there are options to choose from. Using the <> and <> arrow
keys, select the functions and press <ENTER>. Available options will be shown in the
middle of the screen. Again, using the <> and <> arrow keys to view options, then
press <ENTER> to select it. You can press <ESCAPE> to exit at any time.
Auto Scan
In this mode, the Console automatically switches from one powered computer to
the next, sequentially in a fixed interval. During Auto Scan mode, the OSD
displays the name of the selected computer. When Auto Scan detects any
keyboard or mouse activity, it suspends the scanning until activity stops; it then
resumes with the next computer in sequence. To abort Auto Scan mode, press the
left <CTRL> twice, or, press any front button. Scan Type and Scan Rate set the
scan pattern. Scan Type (<F4>:More\Scan Type) determines if scanned
computers must also be eye mark selected. Scan Rate (<F4>:More\Scan Rate)
sets the display interval when a computer is selected before selecting the next
one.
Manual Scan
Scan through power-on computers one by one by keyboard control. Scan Type
(<F4>:More\Scan Type) determines if scanned computers must also be eye mark
selected. Press the <> key to select the previous computer and the down arrow
key to select the next computer. Press any other key to abort Manual Scan mode.
Audio Stick
An optional multimedia module can be linked to the back of each KVM Module for
selecting microphone and stereo speaker signals. There are two options for Audio
Stick: On and Off. When set to On, audio selection follows computer selection.
When set to Off, audio selection stops following computer selection. It is useful if
you want to listen to a particular computer's audio signal while operating other
computers. The non-volatile memory stores the Audio Stick setting.
Scan Type
Ready PC +

: In Scan mode, scan through power-on and eye mark selected
computers.
Ready PC : In Scan mode, scan through power-on computers. The non-volatile
memory stores the Scan Type setting.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The options are 3
seconds, 8 seconds, 15 seconds and 30 seconds. The non-volatile memory stores
the Scan Rate setting.
Keyboard Speed
The Console offers keyboard typematic settings that override similar settings in the
BIOS and in Windows. Available speed options are Low, Middle, Fast and Faster
as 10, 15, 20 and 30 characters/sec respectively. The non-volatile memory stores