Owners manual

Instruction Manual

7. Install three screws on each side of the console:

6. Unlock the console, and pull the left and right rail-lock switches towards you

simultaneously, and hold them in this position while pushing the console into the

cabinet:

Rail Lock Switch

6. Gently, but firmly insert the Console (with Module attached) into the left and right rails:

5. Slide the Module onto the Console side rails, connecting the Module and Console

using the male Centronics connector provided by the Console, and the female

Centronics connector provided by the Module. Ensure the connection is secure, and

that the module is firmly seated within the Console side rails.

Lock

Unlock