User Guide

Quick-Start Guide
Revision: 02/02/2021
SKU #: RKCOND17HD
1-Port VGA/DVI Rackmount LCD Console - 17 in. - 1080p - 1U
Rear View
Package Contents
• LCD Console x 1
• Rear Mounting Brackets x 2
• KVM Cables (USB/VGA) x 1
• Audio Cable x 1
• M5 Cage Nuts x 8
• M5 Screws x 8
• Power Cords (NA, JP, UK, EU, ANZ) x 5
• Quick-Start Guide x 1
Requirements
Installation:
• 1U of Rack Space
• Phillips Head Screwdriver x 1
• (Optional) Cage Nut Tool x 1
• AC Electrical Outlet
• Two people are required for hardware installation
Hardware Installation
Standard Rack Mounting
Note: Installation of this product requires at least two people. One
person is required to hold the unit in place. A second person is
required to screw in all of the required fasteners.
1. Select the 1U of Rack Space that you intend to use for installing
this product.
2. Install four M5 Cage Nuts into the front of your rack.
3. Repeat Step 2 for the rear side of your rack.
Note: Ensure that your M5 Cage Nuts are installed in the same 1U
of Rack Space in both the front and the rear of your rack.
4. While one person holds the RKCOND17HD unit in place, the
For the latest information, specications, and support visit www.startech.com/RKCOND17HD.
Front View (Open)
Front View (Closed)
LCD Module
LCD On / O
Button
Reset Button
Firmware
Upgrade
Switch
Touchpad
Keyboard
LCD
Controls
Keyboard
Release
Catches
USB
HID
Port
Power
LED
Upper
Handle
Module Release
Catches
Front Mounting Brackets
Rear Mounting Brackets
Power
Socket
Console
USB HID
Ports
Console
VGA Port
Console
Audio
Port
KVM
VGA
Port
KVM
Audio
Port
Power Switch
Console
DVI-D Port
KVM DVI-D
Port
KVM USB Port
Firmware
Upgrade
Port