Quick Start Guide

ManualsBrandsStartech ManualsComponents & AccessoriesStarTech.com 16 Port Rackmount KVM Console w/ Cables Integrated KVM Switch w/ 17" LCD - 1U LCD KVM Drawer 50000 MTBF - USB + VGA Support - KVM console - 17"

Quick-Start Guide

Manual Revision: 10/11/2018

Product Design

Actual product may vary from photos

Front View

1 Handle 5 Mounting Bracket (installed)

2 Port Selection Buttons/

LEDs

6 Keyboard LEDs

3 Current Port 7 Display Menu Buttons

4 Rail(s) 8 Release Switch

Rear View

1 Power Connection Port 6 Daisy Chain Port

2 Power Switch 7 USB-A Ports

3 Ground Connection Screw 8 Console Monitor Port

4 Console Mouse Port 9 Host Port

5 Console Keyboard Port

SKU #: RKCONS1716K

16-Port VGA Rackmount LCD Console | 17 in | 1U

For the latest information, specications, and support visit www.startech.com/RKCONS1716K.

Package Contents

• LCD Rackmount Console x 1

• KVM Cables x 16

• M5 Cage Nuts x 8

• M5 Screws x 8

• Regional Power Cords (NA, JP, EU, UK, ANZ) x 5

• Mounting Rails x 2

• Quick-Start Guide x 1

Requirements

• 1U of Rack Space

• Grounding Wire

• Power Source

• Up to 16 Computers or Servers

• Phillips Type Screwdriver

Requirements are subject to change. For the latest requirements,

please visit www.StarTech.com/RKCONS1716K.

Installation

Note: It’s easier to install the LCD Rackmount Console if another

person helps you with the installation.

Warning: Use caution and proper lifting techniques when

installing the LCD Rackmount Console.

1. Based on the mounting depth of the server rack that you are

using, select the appropriate length of Mounting Rails.

2. Decide where in the server rack you want to install the LCD

Rackmount Console.

3. Insert the M5 Cage Nuts (two per Mounting Post) into the

square Mounting Holes on the Mounting Posts.

4. Align the rear Mounting Bracket Rails with the M5 Cage Nuts

on the corresponding Mounting Post.

5. Insert an M5 Screw (two per Mounting Post) through the rear

Mounting Bracket Rail and into the M5 Cage Nut. Do not

tighten the M5 Screws.

6. With assistance, slide the LCD Rackmount Console into the

server rack guiding the rear Mounting Bracket Rails into the

Rail Assembly.

7. Insert a M5 Screw (two per Mounting Post) through the front

Mounting Bracket Rail into the M5 Cage Nut.

8. Use a Phillips Type Screwdriver to tighten the M5 Screws.

9. Ensure that the rear Rails are properly aligned.

10. Use a Phillips Type Screwdriver to tighten the M5 Screws.

Summary of content (2 pages)

PAGE 1
Quick-Start Guide SKU #: RKCONS1716K 16-Port VGA Rackmount LCD Console | 17 in | 1U Product Design Package Contents Actual product may vary from photos Front View 1 8 • LCD Rackmount Console x 1 • KVM Cables x 16 • M5 Cage Nuts x 8 • M5 Screws x 8 • Regional Power Cords (NA, JP, EU, UK, ANZ) x 5 • Mounting Rails x 2 • Quick-Start Guide x 1 Requirements 7 2 3 6 4 4 5 5 1 Handle 5 Mounting Bracket (installed) 2 Port Selection Buttons/ LEDs 6 Keyboard LEDs 3 Current Port 7 Display Menu Bu
PAGE 2
Quick Start Guide Installation Depth Connect the Console 1. Connect a Grounding Wire to the Ground Connection Screw on the LCD Rackmount Console and to the earth-ground connection. 2. Connect one of the KVM Cables to a Computer or Server and the other one to the Host Ports on the LCD Rackmount Console. You can connect up to 16 computers or servers. 3. Connect the appropriate Power Cord for your region to the Power Connection Port on the LCD Rackmount Console and to a Power Source. 4.