U 19” Rackmount LCD Console | USB Actual product may vary from photos User Manual SKU#: RKCONS1901 For the latest information and specifications visit www.startech.
Compliance Statements FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
Safety Statements Safety Measures • Wiring terminations should not be made with the product and/or electric lines under power. • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines. • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
Säkerhetsåtgärder • Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är strömförda. • Installation och/eller montering får endast göras av behöriga yrkespersoner och enligt gällande lokala förordningar för säkerhet och byggnormer. • Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för snubblingsolyckor och andra olyckor kan undvikas. Warning Statements • Make sure to assemble this product according to the instructions.
Table of Contents Compliance Statements.........................................................................1 Safety Statements...................................................................................3 Warning Statements...............................................................................4 Product Diagram (RKCONS1901)..........................................................7 Front........................................................................................................
Adjusting the Image or OSD Position................................................................................................. 17 Adjusting the Language.......................................................................................................................... 17 Resetting the LCD Console to Factory Settings.............................................................................. 18 Exiting the OSD......................................................................................
Product Diagram (RKCONS1901) Front Handle Release Switch Display Console Panel Rails (2) Keyboard Mounting Brackets (2) Touchpad To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Rear Power Connection Port Power Host Switch Port Ground Connection Screw To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.
Product Information Packaging Contents • • • • 1U LCD Rack Console Drawer x 1 Console Cable Kit x 1 Mounting Rails - Set x 1 Power Adapter x 1 Hardware Kit Contents • • • Side Rails with Brackets x 2 Keys x 2 Screw Kit x 1 Requirements Requirements are subject to change. For the latest requirements, please visit www.startech.com/RKCONS1901.
Installation Mounting the Rack Console Drawer Note: It’s easier to install the Rack Console Drawer if another person helps you with the installation. Warning: Use caution and proper lifting techniques when installing the Rack Console Drawer. 1. Based on the mounting depth of the server rack that you are using, select the appropriate length of Mounting Rails. 2. Decide where in the Rack you want to install the Rack Console Drawer. 3.
Grounding the LCD Console Note: Grounding is recommended in environments with high levels of electromagnetic interference (EMI), or frequent electrical surges. 1. Using a Phillips Head Screwdriver, loosen the Grounding Connection Screw. 2. Attach the Grounding Wire to the shaft of the Grounding Connection Screw. 3. Tighten the Grounding Connection Screw, making sure not to over-tighten. 4.
Opening the LCD Console 1. Move the Release Switch to the unlocked position. Unlocking the LCD Console 2. Use the Handle to pull the LCD Console out of the Rack until you hear the LCD Console click into place. The LCD Console will power On. 3. The LED Indicator on the left of the monitor panel changes from orange to green. 4. Adjust the Display into the desired position. Closing the LCD Console 1. Lower the Display until it’s flush against the Keyboard. 2.
Panel Controls and On-Screen Display (OSD) Functions Console Panel Menu The Console Panel buttons are for display adjustments and OSD navigation: Button Auto/Exit Function Auto-synchronizes and scales down the display to any valid factory preset timings. Exits the OSD. SL- Press to scroll to the function you want to adjust. SL+ Press to scroll to the function you want to adjust. Menu/ Select Opens the OSD menu. Used to select an option on the OSD.
3. On the OSD, use the SL- down and SL+ up (on the Console Panel) buttons to select Auto. 4. Press the Menu/Select button. Adjusting the Display’s Brightness 1. On the Console Panel, press the Menu/Select button. 2. On the OSD, use the SL- down and SL+ up (on the Console Panel) buttons to highlight Menu, then press the Menu/ Select button. 3. On the Menu list select Brightness and press the Menu/ Select button. 4.
Adjusting the Display’s Contrast 1. On the Console Panel, press the Menu/Select button. 2. On the OSD, use the SL- down and SL+ up (on the Console Panel) buttons to highlight Menu, then press the Menu/ Select button. 3. On the Menu list select Contrast, then press the Menu/ Select button. 4. Use the SL- down and SL+ up (on the Console Panel) buttons to adjust the contrast on the display. 5. Press the Menu/Select button to save your selection. Adjusting the Display’s Color Settings 1.
Return: Returns to the OSD Menu without making any changes. Press the Menu/Select button to save your selection. • 5. Adjusting the Image or OSD Position 1. On the Console Panel, press the Menu/Select button. 2. On the OSD, use the SL- down and SL+ up on the Console Panel to highlight Menu, then press the Menu/Select button. 3. On the Menu list select Position, then press the Menu/ Select button on the Console Panel. 4.
4. Use the SL- down and SL+ up (on the Console Panel) buttons to select a language. 5. Press the Menu/Select button on the Console Panel to save your selection. Resetting the LCD Console to Factory Settings 1. On the Console Panel, press the Menu/Select button. 2. On the OSD, use the SL- down and SL+ up on the Console Panel to highlight Menu, then press the Menu/Select button. 3. On the Menu list select Misc and press the Menu/Select button on the Console Panel. 4.
LED Indicator LED Indicator Power LED Status Green: On Red: Standby, Suspend, or Off Configuration Testing the LCD Console To test that the LCD Console is working properly, perform the following steps: 1. Power up the Rack Console, and then turn on the Computer. 2. Make sure that the video image is centered on the screen. If the image is not centered, use the OSD controls to adjust the image (see Panel Controls and OSD Functions) or press the Auto button on the Console Panel.
Configuring Display Settings When the LCD Console is first connected you may need to configure one or more display settings. Use the Computer’s operating system to configure the following display settings: • Display mode: also called desktop area or video resolution • Refresh rate: also called vertical scan rate or vertical sync • Color depth: also called color palette or number of colors Specifications Specification Description Panel Type Active Matrix TFT LCD Max.
Operating Temperature Celsius: 0 ° - 50 ° Fahrenheit: 32 ° - 122 ° Storage Temperature Celsius: -20 ° - 60 ° Fahrenheit: -4 ° - 140 ° Humidity 10% - 90% RH Dimensions 447.5 x 482 x 44 mm Important Considerations • • • • If you’re installing the device in a closed or multi-unit rack assembly, ensure that the environmental conditions are within the LCD Console’s maximum and minimum specifications. Installing the LCD Console in a rack or cabinet may reduce airflow.
Warranty Information This product is backed by a two-year warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty. Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
