Technical Specs

Quick start guide
3
Install the hardware
Warning! Hard drives and storage enclosures should be handled carefully, especially
when they’re transported. If you’re not careful with your hard drive, you may lose data
as a result. Make sure that you’re properly grounded by wearing an anti-static strap
when you install any computer component. If an anti-static strap isn’t available, touch
a large grounded metal surface (for example, the computer case) for several seconds to
discharge any built-up static electricity.
1. To open the enclosure, slide the top panel away from the USB port and lift it away
from the enclosure base.
2. Attach the included HDD pad to the back side of the enclosure, opposite of the SATA
connector.