User Manual

ManualsBrandsStartech ManualsExternal Storage EnclosuresStarTech.com Hot Swap Hard Drive Bay for 2.5" SATA SSD / HDD Portable - USB 3.1 (10Gbps) Removable Hard Drive Enclosure - storage enclosure - SATA 6Gb/s - SATA 6Gb/s, USB-C

Manual Revision: 03/07/2017

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/S251BU31REM.

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

S251BU31REM

2.5” SSD / HDD Mobile Rack for 3.5 / 5.25” Bay with

Removable Enclosure - USB 3.1 (10Gbps)

*actual product may vary from photos

Summary of content (11 pages)

PAGE 1
2.5” SSD / HDD Mobile Rack for 3.5 / 5.25” Bay with Removable Enclosure - USB 3.1 (10Gbps) S251BU31REM *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/S251BU31REM.
PAGE 2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
Table of Contents Introduction.............................................................................................1 Product diagram......................................................................................................................................... 1 Package contents....................................................................................................................................... 3 Requirements..................................................................
PAGE 4
Introduction The S251BU31REM combines the benefits of a portable drive enclosure with the features of a drive bay, enabling you to swap, replace, or transport a drive, as well as store your drive in a fixed location. The portable drive enclosure features USB 3.1 (10Gbps) connectivity, providing fast performance and quick access to data. Product diagram Drive enclosure Activity LED Power LED Housing assembly screw Housing assembly screw USB 3.
PAGE 5
Front Drive bay Adapter bracket Slot Eject button Back SATA data connector SP4 Molex connector Instruction manual 2
PAGE 6
Package contents • 1 x 2.5” SATA enclosure • 1 x 3.5” front-panel drive bay • 1 x 3.5” to 5.25” front bay adapter bracket • 1 x SATA data cable • 1 x SATA to SP4 Molex power cable • 1 x LP4 Molex to SP4 Molex power cable • 1 x USB-C to Micro-B cable • 1 x USB-A to Micro-B cable • 4 x drive-mounting screws • 4 x bay-mounting screws • 4 x bracket-mounting screws • 1 x quick-start guide Requirements • 2.5” SSD or HDD • Computer or server chassis with 5.25” or 3.
PAGE 7
Install a drive in the enclosure Warning! Drives should be handled carefully, especially when you transport them. If you’re not careful with your drives, you may experience lost or corrupted data. Make sure that you’re properly grounded by wearing an anti-static strap when you install any computer component. If an anti-static strap isn’t available, touch a large, grounded metal surface for several seconds to discharge any built-up static electricity. 1.
PAGE 8
Install the drive bay into a computer Warning! Make sure that you’re properly grounded by wearing an anti-static strap when you install any computer component. If an anti-static strap isn’t available, touch a large, grounded metal surface for several seconds to discharge any built-up static electricity. 1. Turn off your computer and any devices or peripherals that are connected to it. 2. Unplug the power cable from the back of your computer. 3.
PAGE 9
Install the enclosure into the drive bay • After the Drive bay is installed in your computer, carefully slide the Drive enclosure into the Slot on the front of the Drive bay. To remove the Drive enclosure, press the Eject button on the Drive bay and pull out the Enclosure. About the LED indicators The Drive enclosure features a green Power LED and a red Activity LED.
PAGE 10
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a two-year warranty. StarTech.
PAGE 11
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.