Dual-Slot M.2 Drive to SATA Host Adapter for M.2 NGFF SSDs - RAID S322M225R *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/S322M225SR.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product diagram.....................................................................................1 Package contents....................................................................................2 Requirements..........................................................................................2 About the LED indicators.......................................................................2 Install and connect the host adapter...................................................
Product diagram 1 3 3 4 4 4 4 4 4 5 5 4 1 Power LED 2 RAID jumper switches 3 M.
Package contents • 1 x dual M.2 to SATA host adapter • 2 x sets of drive-mounting hardware • 4 x adapter-mounting screws • 1 x quick-start guide Requirements • 1 or 2 M.2 NGFF drives • SATA host device • Screwdriver The S322M225R is OS independent and doesn’t require any additional drivers or software. Requirements are subject to change. For the latest requirements, please visit www.StarTech.com/S322M225R. About the LED indicators The S322M225R features one power LED and two drive activity/link LEDs.
Install and connect the host adapter Warning! Always handle storage devices with caution. Make sure that you’re properly grounded by wearing an anti-static strap when you install any computer component. If an anti-static strap isn’t available, touch a large, grounded metal surface for several seconds to discharge any built-up static electricity. 1. Depending on the length of your drive, you may need to move the preinstalled screw and standoff.
Prepare a hard drive for use Windows OS If you install a hard drive that has data on it, the hard drive appears under My Computer or Computer with a drive letter assigned to it. If you install a brand-new hard drive that doesn’t contain any data, you must prepare the hard drive for use. Warning! When you complete the following steps, all of the data on your hard drive is deleted. If your hard drive has data on it that you require, you should create a backup file or use a different hard drive. 1.
macOS If you install a brand-new hard drive that doesn’t contain any data, you must prepare the hard drive for use. Warning! When you complete the following steps, you create a partition that uses the entire hard drive space. 1. Do one of the following: • In Spotlight, enter Disk Utility. • Open Finder. Navigate to Applications and click Utilities. Open Disk Utility. 2. Select the hard drive and click the Partition tab. 3. Enter a name for the partition. 4. Click Apply.
Consult the following table to determine which pins to short in order to set a RAID mode: RAID mode Short pins RAID 1 1-2, 5-6 RAID 0 3-4, 5-6 SPAN 1-2, 3-4, 5-6 JBOD/PM 5-6 Configure a RAID mode Warning! When you set or change your RAID configuration, you will erase the data or metadata on your existing drives. Save or back up any important data before you proceed. 1. Set the RAID jumper switches to the configuration that corresponds to the mode that you want to set. 2.
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a two-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
