USB 3.0 SATA HDD/SSD Dock 1:1 Duplicator SATDOCK2REU3 *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.startech.com/SATDOCK2REU3.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IC Radiation Exposure Statement This equipment complies with IC RSS-102 radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0.5cm between the radiator and your body. Déclaration d’exposition à la radiation Cet équipement respecte les limites d’exposition aux rayonnements IC définies pour un environnement non contrôlé. Cet équipement doit être installé et mis en marche à une distance minimale de 0.
Table of Contents Introduction.............................................................................................1 Packaging contents................................................................................................................................... 1 System requirements................................................................................................................................ 1 Product diagram.....................................................................
Introduction You can use the SATDOCK2REU3 to connect your 2.5 in. or 3.5 in. SATA HDDs or SSDs through USB 3.0 and swap drives in and out as you need to. The SATDOCK2REU3 also functions as a standalone drive duplicator and eraser, providing an efficient and a versatile solution to help you manage your external drives. Packaging contents • 1 x HDD dock duplicator and eraser • 1 x USB 3.
Product diagram Front view Power LED and 50% complete indicator HDD 2 activity LED and 100% complete indicator Clone button Link LED and 25% complete indicator HDD 1 activity LED and 75% complete indicator Rear view Erase button USB 3.
Top view HDD 2 Destination slot HDD 1 Source slot HDD 1 eject button HDD 2 eject button Instruction manual 3
Using the SATDOCK2REU3 as a dock Connect the SATDOCK2REU3 to a computer Warning! Drives and storage enclosures should be handled carefully, especially when they’re transported. If you’re not careful with your drives, you may lose data as a result. Always handle storage devices with caution. 1. Make sure that the Power switch on the SATDOCK2REU3 is in the off position. 2. Connect the included power adapter to the Power adapter port on the dock and to a power outlet. 3.
3. On the Computer Management screen, click Disk Management. 4. A dialog window appears and asks you to initialize the drive. Depending on the version of Windows that you’re running, you have the option to create either an MBR or a GPT disk. Note: GPT (GUID partition) is required for drives larger than 2 TB but GPT isn’t compatible with some earlier versions of operating systems. MBR is supported by both earlier and later versions of operating systems. 5. Locate the disk that is labeled Unallocated.
About the dock LED indicators The SATDOCK2REU3 features four LED indicators that mean different things depending on what you’re using the SATDOCK2REU3 for. The following table describes the behavior of the LED indicators when you use the SATDOCK2REU3 as a dock.
Duplicating drives Duplicate a drive Warning! Any data saved on the destination drive will be overwritten during the duplication process. Note: The destination drive must be the same size or larger than the source drive. 1. Disconnect the USB cable from a host computer or the USB 3.0 port on the SATDOCK2REU3. 2. Insert the 2.5 in. or 3.5 in. drive that you would like to duplicate into the HDD 1 Source slot on the dock. 3. Insert the 2.5 in. or 3.5 in.
Erasing drives Erase a drive Warning! After you erase a drive, any data that was stored on it will be unrecoverable when the erase process is complete. Note: Both drive slots on the SATDOCK2REU3 can be used to erase drives. If you have drives in both slots when you complete the steps below, both drives will be erased. 1. Disconnect the USB cable from the USB 3.0 port on the dock. 2. Insert the 2.5 in. or 3.5 in. drive or drive that you would like to erase into the HDD 1 Source slot on the dock. 3.
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a two-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
