User Manual

ManualsBrandsStarTech ManualsComputers & AccessoriesStarTech.com USB 3.1 (10Gbps) Hard Drive Duplicator Dock for 2.5" & 3.5" SATA SSD HDD + 4Kn - USB/ USB-C Cloner ,Black

Manual Revision: 12/22/2021

For the latest information, technical specications, and support for

this product, please visit www.startech.com/SDOCK2U313R.

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

SDOCK2U313R

USB 3.1 (10Gbps) Standalone Duplicator

Dock for 2.5” and 3.5” SATA Drives

*actual product may vary from photos

Summary of content (12 pages)

PAGE 1
USB 3.1 (10Gbps) Standalone Duplicator Dock for 2.5” and 3.5” SATA Drives SDOCK2U313R *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.startech.com/SDOCK2U313R.
PAGE 2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
Table of Contents Introduction.............................................................................................1 Packaging contents................................................................................................................................... 1 System requirements................................................................................................................................ 1 Product diagram.....................................................................
PAGE 4
Introduction Packaging contents • 1 x USB 3.1 duplicator docking station • 1 x universal power adapter (NA/EU/UK/AU) • 1 x USB C to B cable • 1 x USB A to B cable • 1 x quick start guide System requirements • Computer system with a USB port • Up to two 2.5 in. or 3.5 in. SATA hard drives (HDD) or solid-state drives (SSD) The SDOCK2U313R is OS independent and doesn’t require any additional drivers or software. Note: To obtain the maximum USB throughput, you must use a computer with a USB 3.
PAGE 5
Product diagram Front view Drive #1 slot (destination for duplication) Drive #2 slot (source for duplication) Drive LEDs Drive eject buttons Duplication progress LED POWER button and LED START duplication button PC/COPY mode button and LED Quick start guide 2
PAGE 6
Rear view USB 3.
PAGE 7
Installation Connect the duplicator dock Warning! Drives and storage enclosures should be handled carefully, especially when they’re transported. If you’re not careful with your drives, you may lose data as a result. Always handle storage devices with caution. 1. Connect the external power adapter from the duplicator dock to a power outlet. 2. Connect one of the included USB 3.1 cables from the duplicator dock to a USB port on your computer system.
PAGE 8
4. A dialog window appears and asks you to initialize the drive. Depending on the version of Windows that you’re running, you have the option to create either an MBR or a GPT disk. Note: GPT (GUID partition) is required for drives larger than 2 TB but GPT isn’t compatible with some earlier versions of operating systems. MBR is supported by both earlier and later versions of operating systems. 5. Locate the disk that is labeled Unallocated.
PAGE 9
Using the duplicator dock Duplicate a drive 1. Install the source and destination drives as per the instructions in the Install a drive topic. Note: If you’re connecting drives for duplication, place the drive containing the data that you intend to copy from in the drive #2 slot, and place the drive that you intend to copy the data to in the drive #1 slot. 2. Turn on the docking station. 3. Press the PC/Copy mode button for 3 seconds until the PC/COPY mode LED is illuminated red. 4.
PAGE 10
About the LED indicators The SDOCK2U313R includes five LED indicators: a power LED, a PC/COPY mode LED, two drive activity LEDs, and a duplication progress LED. For more information about what the LED indicators represent, consult the table below.
PAGE 11
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a two-year warranty. StarTech.
PAGE 12
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.